This is a COMPLETE Operation & Maintenance Manual for the BOMAG Sanitary landfill compactor BC671RB / BC771RB / BC671RS / BC771RS.

SERIAL NUMBERS:
S/N 101 570 42 .... MTA 11-C350
S/N 101 570 52 .... MTA 11-C370
S/N 101 570 45 .... MTA 11-C350
S/N 101 570 55 .... MTA 11-C370

Table of Contents:
=========
Technical Data
Safety regulations
Indicators and Controls
OPERATION-
3.1 General notes
3.2 Description of indicators and control elements
4.1 General notes
4.2 Tests before starting to operate
4.3 Starting the engine
4.4 Starting at low temperatures
4.5 Starting with jump leads
4.6 Driving the machine
4.7 Emergency exit
4.8 Actuating the emergency stop switch
4.9 Operating the dozer blade (RB)
4.10 Operating the bucket (RS)
4.11 Emergency operation of dozer blade (only RB-version)
4.12 Operating the service brake
4.13 Emergency steering (only RB-version)
4.14 Operating the parking brake
4.15 Shutting the engine down
4.16 Parking on a slope
4.17 Towing the machine
4.18 Transport of the machine
MAINTENANCE-
5.1 General notes on maintenance
5.2 Fuels and lubricants
5.3 Table of fuels and lubricants
5.4 Running-in instructions
5.5 Maintenance chart
5.6 Checking the engine oil level
5.7 Checking the coolant level
5.8 Draining the water separator in the fuel system
5.9 Checking the V-belt
5.10 Checking the fuel level
5.11 Checking the hydraulic oil level
5.12 Checking the machine for damage and leaks
5.13 Lubricating the joints and bearings on the bucket (RS)
5.14 Changing engine oil and oil filter cartridge
5.15 Draining the engine oil condensate from the oil tank
5.16 Checking the concentration of anti-freeze agent and the coolant additive
5.17 Changing the coolant filter
5.18 Changing the fuel filter cartridges
5.19 Servicing the air conditioning (summer operation)
5.20 Checking the fastening of the scrapers
5.21 Checking the oil level in the splitter gear
5.22 Checking the oil level in the planetary drives
5.23 Checking the engine fasteners
5.24 Checking, cleaning the radiator and the hydraulic oil cooler
5.25 Servicing the battery, checking the main battery disconnect switch
5.26 Checking, filling the central lubrication system
5.27 Greasing hinges on doors and maintenance flaps
5.28 Checking the condition and tension of the generator V-belt, changing the V-belt
5.29 Checking the condition and tension of the refrigerant compressor V-belt, changing the V-belt
5.30 Checking the condition and tension of the blower V-belt, changing the V-belt
5.31 Changing the fresh air filter and the circulation filter
5.32 Checking, adjusting the injection valves and the valve clearance
5.33 Checking the fastening of engine / turbo charger / combustion air hoses
5.34 Changing the fuel filter for the cabin heater (diesel)
5.35 Checking, cleaning the oil bath air filter for the cabin heater (diesel)
5.36 Changing the oil in the planetary drive
5.37 Changing the oil in the splitter gear
5.38 Changing the hydraulic oil fine filter
5.39 Checking the coolant pump
5.40 Changing the hydraulic oil
5.41 Changing the coolant
5.42 Draining the fuel tank sludge
5.43 Checking the condition of the articulated joint
5.44 Maintenance work, which has to be performed every 6000 operating hours by a specialist workshop
5.45 Servicing the combustion air filter
5.46 Cleaning the condenser (air conditioning unit)
5.47 Adjusting scrapers and edge cutters
5.48 Replacing the wheel caps
5.49 Checking the cutting plates, replace the cutting plates if necessary
5.50 Tightening the bolted connections
5.51 Checking, changing the starting aid container (ether)
5.52 Checking the provision container of the windscreen washer system
5.53 Conservation
TROUBLE SHOOTING-
6.1 General notes
6.2 Engine
6.3 General notes on control and diagnostic switch for engine problems (only BC 771 RB)

=========

Model Specification: BOMAG Sanitary landfill compactor BC671RB / BC771RB / BC671RS / BC771RS
Language: English
File Format: PDF
Total Pages: 138
Requirements: Adobe PDF Reader
ZOOM IN/OUT: YES
Downloadable: YES
Compatible: All Versions of Windows & Mac

=========

THIS MANUAL DESCRIBES PROCEDURES FOR OPERATION, HANDLING, LUBRICATION, MAINTENANCE, CHECKING, AND ADJUSTMENT. IT WILL HELP THE OPERATOR AND MAINTENANCE PERSONNEL REALIZE PEAK PERFORMANCE THROUGH EFFECTIVE, ECONOMICAL AND SAFE MACHINE OPERATION AND MAINTENANCE.

This PDF file is Bookmarked and SEARCHABLE to make what you need easy to find.

ALL MANUALS ARE WINDOWS 7, VISTA32 AND 64, XP, ME, 98, NT, 2000 COMPATIBLE AND WORK WITH MAC!

INSTANT DOWNLOAD UPON RECEIPT OF YOUR PAYMENT..

FIND IT...PRINT IT...USE IT...then Trash it.

Tons of pictures and diagrams at your fingertips!!

All pages are printable, so run off what you need & take it with you into the garage or workshop.

Save Money $$ By doing your own repairs! These manuals make it easy for any skill level WITH THESE VERY EASY TO FOLLOW, STEP-BY-STEP INSTRUCTIONS!

INSTANT DOWNLOAD means NO SHIPPING COST or WAITING FOR A CD OR PAPER MANUAL TO ARRIVE IN THE MAIL...YOU WILL RECEIVE THIS MANUAL TODAY VIA INSTANT DOWNLOAD ON COMPLETION OF PAYMENT VIA OUR SECURE PAYMENT PROCESSOR. WE ACCEPT ALL MAJOR CREDIT/DEBIT CARDS/PAYPAL.

Looking for some other Service Repair Manual, please check:



Thanks for visiting!