This is the original factory operating and maintenance manual for the Linde Pallet Truck Type 141, specifically for the L16AS model. This manual contains detailed illustrations, circuit diagrams, and instructions to help you operate and maintain your truck. It begins with an overview of the L16AS model, including a description of its plates and labels, technical characteristics, and technical description. The manual then guides you through the controls, indicators, and features of the pallet truck, including the time counter unit, discharge limiter indicator, and safety features. The manual covers daily checks and operating procedures before starting the truck, emphasizing safety rules and definitions of safety terms. It provides comprehensive instructions on periodic checks, recommendations for starting up, and checks before the first startup. It includes detailed instructions on daily checks before use, covering aspects like checking forward/reverse and raise/lower controls, safety braking, automatic braking, driver presence safety device, emergency stop button, safety inverter switch, horn, battery charge condition, and more. The manual explains how to open and close the battery cover, connect the battery connector, recharge the battery with an external charger, check the state of terminal cables and battery connector, check the electrolyte level and topping up with water, check the electrolyte density, and remove/replace the battery. The manual covers usage instructions, including startup procedures, safety switch operation, emergency stop button use, determining running direction, steering, driving forward and reverse, reversing the running direction, using the truck on slopes, using the electromagnetic braking, applying the parking brake, and operating the horn. It details instructions for controlling the mast, raising and lowering the mast using both the control lever on the chassis and the tiller. It covers handling loads, including reading the rating plate, adjusting the fork spacing, picking up a load from the ground, transporting a load, putting a load down on the ground, stacking a load, picking up a load at a height, and procedures before leaving the truck. The manual provides information on slinging, lifting, towing, and removing the mast. It also covers transport and storage of the pallet truck. The maintenance section covers general comments, work on the elevator mast (standard, duplex, and triplex), checks and maintenance work after the first 50 hours of service, a calendar for maintenance work, and maintenance as required. It includes instructions on cleaning the pallet truck, cleaning and greasing chains, cleaning and greasing the mast, opening the front cover, checking the attachment and condition of the wheels, checking fuses, checking the electrolyte level and topping up with water, checking the electrolyte density, checking the condition of cables, terminals and the battery connector, and cleaning the battery and battery compartment. The manual outlines maintenance procedures every 500 hours, including lubrication of the drive unit steering bearing, checking various hinges, checking the leak tightness of the hydraulic circuit, checking the hydraulic fluid level, checking the condition and attachment of the mast and chains, checking the length of mast chains, checking the condition and attachment of cables and electrical connections, cleaning the electrical panel, checking contact wear, checking the traction motor brushes, and adjusting the electromagnetic brake. It includes maintenance procedures every 1000 hours, such as checking the reduction gear oil level, removing the motor-pump unit, checking the pump motor brushes, cleaning the hydraulic filter and cap, and checking the mechanical attachment of devices. It covers maintenance procedures every 2000 hours, including replacing the hydraulic fluid and replacing reduction gear oil. The manual also provides recommended lubricants, technical characteristics, hydraulic diagrams, and electrical diagrams for the L16AS model. Finally, it includes an index for easy reference.

The Linde Pallet Truck Type 141: L16AS is a robust and reliable material handling solution designed for efficient and safe movement of palletized goods within warehouses, distribution centers, and other industrial settings. This electric pallet truck is known for its maneuverability, ease of operation, and ergonomic design, making it suitable for a wide range of applications. The L16AS model boasts a lifting capacity of 1.6 tons (3,527 lbs) and a compact design, allowing for efficient operation in tight spaces. Its powerful electric motor provides smooth and quiet operation, while the ergonomic handle design minimizes operator fatigue during extended use. The truck features a durable steel frame and high-quality components, ensuring long-lasting performance and reliability. The Linde Pallet Truck Type 141: L16AS comes equipped with a range of safety features, including an emergency stop button, a load capacity indicator, and a horn. Its hydraulic system ensures smooth lifting and lowering, while the integrated safety features minimize the risk of accidents. The truck's design incorporates features like a low step height and a comfortable grip on the handle, enhancing operator safety and productivity. The L16AS also features a range of optional accessories, including a battery charger, a side-mounted scale, and a variety of lifting forks, allowing users to customize the truck to meet their specific needs. Regular maintenance and proper operation ensure optimal performance and minimize downtime. By adhering to the manufacturer's recommended maintenance schedule and operating instructions, you can maximize the lifespan of your Linde Pallet Truck Type 141: L16AS and achieve efficient and safe material handling operations.