This is the complete factory service repair technical workshop manual for the John Deere 1166, 1169H, 1174, 1177, 1177 Hydro/4, 1188, 1188 Hydro/4 Combines. This Service Manual has easy-to-read text sections with top quality diagrams and instructions.They are specifically written for the do-it-yourselfer as well as the experienced mechanic.With step by step instruction & highly detailed exploded pictures & diagrams to show you how to complete the required job correctly & efficiently Using. John Deere 1166, 1169H, 1174, 1177, 1177 Hydro/4, 1188, 1188 Hydro/4 Combines Service Repair Technical Manual covers every single detail on your machine.provides step-by-step instructions based on the complete disassembly of the machine.This repair manual is an inexpensive way to keep you vehicle working properly.


Models Covered:

John Deere 1166 Combine
John Deere 1169H Combine
John Deere 1174 Combine
John Deere 1177 Combine
John Deere 1177 Hydro/4 Combine
John Deere 1188 Combine
John Deere 1188 Hydro/4 Combine


Service Technical Manual Covers:

SECTION 10 - GENERAL
Group 05 - Specifications
SECTION 20 - ENGINE REPAIR
Group 01 - Engine Pulley
Group 05 - Removing 6466 Engine
Group 06 - Removing 6359 Engine
Group 10 - Cooling System
SECTION 30 - FUEL SYSTEM
Group 05 - Fuel System
Group 10 - Speed Control And Engine Shut-Off Components
SECTION 40 - ELECTRICAL EQUIPMENT REPAIR
Group 05 - Connectors
Group 10 - Electrical System Components
Group 15 - Low Shaft Speed Monitor System
Group 20 - Harvest Performance Monitor
Group 25 - Electromagnetic Transmission Brake
Group 30 - Starting Motor (John Deere)
Group 31 - Starting Motor (Bosch)
Group 35 - Alternator
Group 40 - Dial-A-Matic
Group 45 - Sidehill Leveling System
SECTION 50 - POWER TRAIN
Group 02 - Variable Ground Speed Drive
Group 05 - Posi-Torq Ground Drive - Upper Unit
Group 10 - Posi-Torq Ground Drive - Lower Unit
Group 15 - Clutch Operating Assembly
Group 20 - Engine Clutch
Group 25 - Hydrostatic Drive, Oil And Filter Change (Sauer)
Group 26 - Hydrostatic Drive, Oil And Filter Change (Sauer)
Group 30 - Hydrostatic Drive, Variable Pump (Sauer)
Group 31 - Hydrostatic Drive, Variable Pump (Eaton)
Group 35 - Hydrostatic Drive, Fixed-Displement Motor (Sauer)
Group 36 - Hydrostatic Drive, Fixed-Displecement Motor (Eaton)
Group 40 - Hydrostatic Drive, Oil Cooler
Group 45 - Transmission With Differential
Group 50 - Final Drives
Group 55 - Final Drives (Rice Combine)
Group 60 - Final Drives (Sidehill Combine)
SECTION 60 - BRAKES, REAR AXLE AND STEERING
Group 05 - Parking Brake
Group 10 - Brake Operating Assembly
Group 15 - Foot Brakes (Internal Slave Cylinder)
Group 16 - Foot Brakes (External Slave Cylinder)
Group 18 - Foot Brakes (Sidehill Combine)
Group 20 - Hydrostatic Steering
Group 25 - Rear Axle
Group 30 - Rear Axle (Sidehill Combine)
SECTION 70 - HYDRAULIC SYSTEM
Group 05 - Hydraulic Lines
Group 10 - Dual Hydraulic Pump
Group 11 - Triple Hydraulic Pump
Group 15 - Mechanical Four-Spool Control Valve
Group 16 - Mechanical Seven-Spool Control Valve
Group 18 - Leveling System Control Valve
Group 20 - Electro-Magnetic Control Valve
Group 25 - Hydraulic Cylinders
Group 30 - Hydraulic Reverser Motor
Group 35 - Hydrostatic Reel Drive
Group 40 - Hydraulic Accumulator / Header Pressure Gauge
SECTION 80 - MISCELLANEOUS
Group 05 - Bearings And Shafts
Group 10 - Drive Belts
Group 15 - Drive Chains
SECTION 90 - OPERATORS PLATFORM WITH CAB
Group 05 - Cab Ventilation System
Group 10 - Safe Handling Of Refrigerants
Group 15 - Air Conditioning System Service
Group 20 - Air Conditioning Compressor
Group 25 - System Components
Group 26 - Air Conditioning With Integrated Condenser Cooling
Group 30 - Cab Heating System
Group 35 - Operators Cab
Group 40 - Platform Control Levers
Group 45 - Steering Column
Group 50 - Operators Seat
SECTION 100 - CUTTING PLATFORMS AND CORN HEADS
Refer To Technical Manual For Harvesting Units (TM-4468)
SECTION 110 - FEEDER HOUSE
Group 05 - Feeder House Drive
Group 10 - Feeder House
Group 15 - Chain Transmission - Cutting Platform Drive
Group 20 - Hydraulic Reverser
SECTION 120 - SEPARATOR AND CLEANING UNIT
Group 05 - Separator Drive
Group 10 - Beater
Group 15 - Variable Cylinder Drive - Upper Unit
Group 20 - Variable Cylinder Drive - Lower Unit
Group 21 - Variable Cylinder Drive - Mechanically Adjustable
Group 25 - Cylinder Drive Reduction Gear
Group 30 - Threshing Cylinder
Group 35 - Concave
Group 40 - Straw Walkers
Group 45 - Cross Shaker
Group 50 - Fan, Variable Fan Drive
Group 55 - Cleaning Shoe With Sieves
SECTION 130 - ELEVATORS, GRAIN TANK AND UNLOADING AUGERS
Group 05 - Tailings Auger And Elevator
Group 10 - Clean Grain Auger And Elevator
SECTION 140 - SPECIAL EQUIPMENT
Group 05 - Straw Chopper Countershaft
Group 10 - Straw Chopper
Group 15 - Straw Spreader
SECTION 220 - ENGINE COOLING SYSTEM OPERATION
Group 05 - Cooling System
SECTION 230 - FUEL AND AIR INTAKE SYSTEM OPERATION
Group 05 - Air Intake System
Group 10 - Fuel System
SECTION 240 - ELECTRICAL SYSTEM - OPERATION AND TESTS
Group 05 - General Information
Group 10 - Circuit Plan, Wiring Diagram And Wiring Harnesses
Group 15 - Circuit Testing
Group 20 - Checking Individual Components
Group 25 - Checking Electro-Magnetic Control Valve
Group 30 - Checking Speed Monitor System
Group 35 - Checking Harvest Performance Monitor
Group 40 - Starting Motor
Group 45 - Alternator
Group 50 - Checking Dial-A-Matic Header Height Control
SECTION 250 - POWER TRAIN - OPERATION AND TESTS
Group 05 - Posi-Torq Ground Drive
Group 10 - Clutch Operating Assembly
Group 15 - Clutch
Group 20 - Hydrostatic Ground Speed Drive
Group 25 - Testing Hydrostatic Drive (Sauer)
Group 26 - Testing Hydrostatic Drive (Eaton)
Group 30 - Transmission
SECTION 260 - BRAKES, STEERING AND REAR AXLE - OPERATION AND TESTS
Group 05 - Full Disk Brakes
Group 06 - Partial Disk Brakes
Group 10 - Hydrostatic Steering
Group 15 - Hydrostatic Steering - Diagnosing Malfunctions
Group 20 - Testing Hydrostatic Steering
SECTION 270 - HYDRAULIC SYSTEM - OPERATION AND TESTS
Group 05 - Hydraulic Circuits
Group 10 - Mechanical Four-Spool Control Valve
Group 11 - Mechanical Seven-Spool Control Valve
Group 15 - Electro-Magnetic Control Valve
Group 20 - Testing Hydraulic System
SECTION 290 - OPERATORS PLATFORM AND CAB - OPERATION AND TESTS
Group 05 - Cab Ventilation - Operation And Tests
Group 10 - Air Conditioning System Operation
Group 15 - Air Conditioning System Tests
And More......


============================================================
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader & WinZip


NO waiting, Instant Download. All pages are printable. John Deere 1166, 1169H, 1174, 1177, 1177 Hydro/4, 1188, 1188 Hydro/4 Combines Service Repair Technical Manual are saving you money on postage and packaging. It is great to have.


Looking for some other Service Repair Manual,please check:


Thanks for visiting!